Company Data Sheet

For a catalog with more information about Belco, standard detail and specification sheets, customer references and information about installation and handling please fill out the catalog request form or call us at 800-251-8265.

Physical Address:

2303 Taylor's Valley RD., Belton, TX 76513

Telephone:

(254) 933-9000 (254) 939-2644 (800) 251-8265

Email:

belco@vvm.com

Personnel:

President - Steve Macy
Sales Manager - Lloyd Hoelscher
Sales Administrator - Tammy Parker
Transportation - Barry Shores
Oil Field & Water Sales - Richard Dunivent
Project Manager - Gayle Monahan
Plant Manager Tank - Victor Felix
Plant Manager Duct - Jose Jimenez
Plant Engineer - Demetrio Salazar
Operations Manager - Richard Ramirez
Engineering Manager - Doug Preston PE
Safety, Process, & Quality Assurance Manager - Mark Guenat
Field Services Supervisor - Charles Brown
Financial Manager - Theresa Bernhard

Production Personnel:

150 Employees

General:

A Texas corporation since 1980
Types of Fabrication: (FRP)
Custom Equipment – 65%
Proprietary Products – 10%
Commodity Items – 25%

Fiberglass Products Manufactured :

Tanks, Pipe, Duct, Scrubbers, Towers, Manholes, Wet Wells
Metering Manholes, Flumes, Dampers

Fabricated in accordance with:

ASME RTP-1
ASTM D 3299
ASTM D 4097
ASTM D 3753
ASTM D 2992/2996/2310
SPI’s Quality Assurance Report
Customer’s Specifications

Resins Utilized:

Hetron/Derakane resins by Ashland Chemicals
Vipel Resins by AOC
Corezyn by Interplastic Corp.
Others as may be specified

Shapes:

Cylindrical Vessels with:
Flat, Cone, Dished or Sloped Bottom & Tops
Cylindrical Horizontal
Rectangular Vertical or Horizontal
Dual Wall/Secondary Containment

Method of Fabrication:

Contact Molded hand lay-up
Filament Wound (Chop/Hoop)
Filament Wound (Helical)
Filament Wound Vessel Sidewall & Bottom Shells as an Integral Unit

Types of Fabrication:

Towers – up to 24’ Diameter and 60 Feet Height
Tanks – up to 24’ Diameter and 60 Feet Height/Length
Stacks – up to 200’ in height

Vessel Accessories:

Fiberglass:	Spargers Distributors Baffles Legs or Skirt Support Nozzles with Plate or Conical Gussets Lifting & Hold Down Lugs Ladders, Cages & Platforms Level Gauges Weirs
Steel:	Ladders, Cages & Platforms Lugs & Clips Agitator Supports Saddles & Straps

Engineering Capabilities:

In-house

Description of Shop Area & Equipment:

VESSEL PRODUCTION: Approximately 65,000 sq. ft.; two filament-winding areas with cantilevered molds from 4’ dia. to 15’6" dia. One area allows lengths up to 50 ft. long to be wound; the second area allows for lengths up to 25’ long. Top & bottom mold area includes four chopper gun bays, as well as 10’ x 20’ table for vacuum forming or sheet lay-up.

DUCT & PIPE PRODUCTION: Approximately 35,000 sq. ft.; four turning stations and one pipe winder with molds from 1" to 72".

FRP ASSEMBLY: Shop area includes approximately 15,000 sq. ft. for assembly. Other equipment includes nozzle molds from 1" dia. through 60" dia., post cure facilities, pressure and hydro testing facilities. Equipment for supportive physical testing is available. Eight bridge cranes and additional monorail hoists facilitate ease of handling.

CUSTOM STEEL FABRICATION: Including stands, mixer mountings, ladders, handrails, trailers, etc.

Support Personnel:

Full in-house drafting available for custom fabrications.

Engineering assistance for structural and mechanical design is available in-house as well as by associated consultants.

Transportation:

Delivery is via our trucks and custom designed trailers or by outside contract carriers.

Union Affiliation:

None

Area Competitively Served:

Continental United States, Mexico, Canada, and Export

Financial Information:

Available upon request